目录

Linux-设置时区及ntp服务器

3

设置时区

  1. 查看现在的时区

       [root@proxy ~]# timedatectl
                      Local time: Tue 2025-12-30 14:29:03 CST
                  Universal time: Tue 2025-12-30 06:29:03 UTC
                        RTC time: Tue 2025-12-30 06:29:03
                       Time zone: Asia/Shanghai (CST, +0800)
       System clock synchronized: yes
                     NTP service: active
                 RTC in local TZ: no
    
  2. 列出时区列表,找到需要需改的时区

       [root@proxy ~]# timedatectl list-timezones
       Africa/Abidjan
       Africa/Accra
       ...
       Asia/Shanghai
       ...
    
  3. 设置时区

       [root@proxy ~]# timedatectl set-timezone Asia/Shanghai
    

设置ntp服务器

  1. 下载ntp服务

       dnf install chrony
    
  2. 修改配置文件 vim /etc/chrony.conf

       # 注释掉原来的 server 行
       # pool pool.ntp.org iburst
    
       # 使用阿里云 NTP 服务器
       server ntp1.aliyun.com iburst
       server ntp2.aliyun.com iburst
       server ntp3.aliyun.com iburst
       server ntp4.aliyun.com iburst
       server ntp5.aliyun.com iburst
       server ntp6.aliyun.com iburst
       server ntp7.aliyun.com iburst
    
  3. 启用chronyd服务

       systemctl enable --now chronyd
    
  4. 查看NTP数据源

       [root@proxy ~]# chronyc sources -v
    
         .-- Source mode  '^' = server, '=' = peer, '#' = local clock.
        / .- Source state '*' = current best, '+' = combined, '-' = not combined,
       | /             'x' = may be in error, '~' = too variable, '?' = unusable.
       ||                                                 .- xxxx [ yyyy ] +/- zzzz
       ||      Reachability register (octal) -.           |  xxxx = adjusted offset,
       ||      Log2(Polling interval) --.      |          |  yyyy = measured offset,
       ||                                \     |          |  zzzz = estimated error.
       ||                                 |    |           \
       MS Name/IP address         Stratum Poll Reach LastRx Last sample
       ===============================================================================
       ^+ 118.31.40.99                  2   6   377     4   -123us[ -123us] +/-   37ms
       ^* 203.107.6.88                  2   6   377     6  -3181us[-3722us] +/-   41ms
    

推荐文章

Shell脚本-循环